The APdate! I35CF is an industrial capable IDE-storage device with 3,5" format with no moving parts, inured to concussions,
or extremely variations in temperature (-40° - +85°C) and offers
all advantages of the flash technology in one standard IDE-interface. These modul provides the same storage functions found in hard disk
drives. It will be optional equiped with one or two CompactFlash
cards (both Type I or II). Both cards are operating independently
as master- and slave-drive (adjustable by jumper).
APdate! I35CF IDE Flash Storage Drive
- Up to 2 x 8 GB Flash memory
- Standard ATA interface
- Standard hard disk format
- Shock and vibrations resistant
- Low power consumption
- Extended and industrial temperature range optional
- No additional software drivers required
| Form Factor/Dimensions | 3,5" |
| Solid State | No moving parts |
| Technology | Adtron ArrayProTM Flash Array processing |
| Interface | ATA/ATAPI-6 with UDMA-66 |
| Mounting | Harddisk industrial standard, all directions |
| Connector | Standard IDE 44-pin, 2mm |
| Transfer Mode | PIO Mode 0-4 or DMA (depends on CF cards) |
| Software | No software drivers are required |
| Adressing | 48-bit Block adressing |
| Sectors | Standard 512 Byte sectors |
| Error detection and correktion | ECC Defect Management |
| Voltage | 5VCC +/- 5% |
| Capacity | 32MB up to 2*8GB |
| MTBF | 250000 up to > 3 Mio hours |
| Data Write/Erase Endurance per sector | 300000 bis > 1 Mio |
| Warranty | 3 years |
| Temperature range (operating) | 0°C up to 60°C (Standard temp.) |
| -10°C up to 85°C (Industrial temp.) | |
| -40°C up to 85°C (Industrial extended temp.) |
| Description | Part number |
|---|---|
| 3,5" IDE Drive | I35CF-Mxxxxtyyyyt0i-101 |
| Capacity Master (xxxx): 32MB up to 8GB Capacity Slave (yyyy): 32MB up to 8 GB CF Identifier Temperature range (t):C (Standard), E (Extended), I (Industrial) Please ask for more products |
(Technical details are subject to change without prior notice)