APdate! card solutions

The Delkin Iridium SATA Solid State Drive is an industrial capable SLC Flash storage device for usage in extraordinary rough environments.
The new patentet Tekta™ coating (optional) protects from water and dust and also keeps the Iridium Drives more insensible against vibrations than standard Flash Drives.
The Delin Iridum™ Series meets highest demands: The SSDs deliver excellent data rates up to 210MB/s (writing) respectively 250MB/s (reading).
A wide feature set completes the Delkin SSDs. SMART monitoring and Secure Erase Funktion belong to it as well as Native Comand Queuing and TRIM support. An additional central feature is File Force Technology™ (FFT), which together with Wear Leveling, Bad Block Management, Defragmentation, Sudden Power-Off Recovery and Over-Provisioning guarantees for maximum reliability and endurance.
The 1.8" Delkin Iridium SSD is available in capacities from 8 up to 128GB.

The Delkin Iridium is also available in 1.8" format.

• 8, 16, 32, 64 and 128GB SLC NAND Flash Memory
• No moving parts
• Standard SATA II Interface
• Standard Harddisc format
• PIO- Multiword DMA- and UDMA support
• Tekta™ sealing optional
• File Force Technology™ (includes ECC Defect Management, Wear Leveling, Bad Block Management, Defragmentation, Sudden Power-Off Recovery and Over-Provisioning)
• S.M.A.R.T. Support
• TRIM Support
• Secure Erase functions
• Shock and vibrations resistent
• Low Power consumption
• No additonal software drivers
• Extentet temperature range (optional)

Specification

Form Factor/Dimensions	2,5" Width x depth x hight = 70 x 100 x 9,5 mm
Solid State	SLC NAND Flash (Industrial standard) no moving parts
Interface	SATA II Rev. 2.6, 3.0G
Montage	Harddisc Industrial standard, all orientation
Connector	Standard 7-pin Signal Segment and 15-pin Power Segment
Transfer Modes	PIO Mode 0-4 up to UDMA Mode 6 (Ultra DMA 133)
Data transfer rate	max. 250MB/s sustained read max. 210MB/s sustained write
I/O Performance	13134 IOPS (Sequential Read*) 11800 IOPS (Sequential Write*) 9146 IOPS (Random Read*) 2778 IOPS (Random Write*) * 512 Byte
Software	no driver software required
Sectors	Standard 512 Byte sectors
D² File Force Technology™	ECC Defect Management, Wear Leveling, Bad Block Management, Defragmentation, Sudden Power-Off Recovery, Over-Provisioning
D² Rugged Immersion Mechanics™	Tekta sealing
D² SureFire Erase™	Secure Erase Funktionen acc. NSA 9-12, IRIG 106
Data securityt	10 years
Power requirements	5VCC +/- 5%
Power consumption	max. 1,5W Sleep: 0,375W
Capacities	8, 16, 32, 64, 128GB (more capacities upon request)
Temperature range (operating)	0°C up to 70°C (Standard Temperature) -40°C up to 85°C (Extended Temperature)
MTBF	>1,000,000 hours
Data Write/Erase Endurance	>1,000,000
Warranty	5 years

Environmental

Temperature range (operating)

0°C up to 70°C (Standard Temperature range) -40°C up to 85°C (Extended Temperature range)

Order Information

Description	Part number
2,5" Iridium SATA Drive, 8GB Temperature range (operating) 0°C up to 70°C	DS08TFHIB-25000-D
2,5" Iridium SATA Drive, 8GB Temperature range (operating) -40°C up to 85°C	DE08TFHIB-25000-D
2,5" Iridium SATA Drive, 16GB Temperature range (operating) 0°C up to 70°C	DS16TFNIB-25000-D
2,5" Iridium SATA Drive, 16GB Temperature range (operating) -40°C up to 85°C	DE16TFNIB-25000-D
2,5" Iridium SATA Drive, 32GB Temperature range (operating) 0°C up to 70°C	DS32TFPIB-25000-D
2,5" Iridium SATA Drive, 32GB Temperature range (operating) -40°C up to 85°C	DE32TFPIB-25000-D
2,5" Iridium SATA Drive, 64GB Temperature range (operating) 0°C up to 70°C	DS64TFPIB-25000-D
2,5" Iridium SATA Drive, 64GB Temperature range (operating) -40°C up to 85°C	DE64TFPIB-25000-DD
2,5" Iridium SATA Drive, 128GB Temperature range (operating) 0°C up to 70°C	DS1HMGFIB-25000-D
2,5" Iridium SATA Drive, 128GB Temperature range (operating) -40°C up to 85°C	DE1HMGFIB-25000-D
Please ask for additional products