APdate! card solutions

The InnoDisk SATA 10000 Flash Drive with form factor 2.5" is similar to the 1.8" modell a Solid State drive with an excellent performance. It achieves data transfer rates up to 70 MB/s (sustained write) and 120 MB/s (sustained read). With its robust metal casing it offers like all other InnoDisk Solid State drives high reliability, low power consumption and a noiceless operating. As a HD alternative it is primarily capable in industrial and production environments. The InnoDisk SATA 10000 is available with capacities from 8 up to 32 GB.
The 2.5" InnoDisk SATA 10000 is also available with a 1.8" form factor. (link)

InnoDisk SATA 10000 2,5" Storage Drive

• 8, 16, 32, 64,128 und 256GB SLC NAND Flash memory
• No moving parts
• Standard Micro SATA II Interface
• Standard hard disk format
• PIO- Multiword DMA- and UDMA Support
• ECC Defect Management
• Wear Leveling
• Shock- and vibrations resistant
• Low power consumption
• No additional software drivers are required
• Extended Temperature range optional

Specification

Form Factor/Dimensions	2,5"
Width:	69,7 mm
Depth:	100 mm
Height:	9,3 mm
Solid State	SLC NAND Flash (industrial standard) no moving parts
Interface	SATA II 3.OG
Mounting	Hard disk industrial standard, all orientations
Connector	Standard 7-pin Signal Segment and 15-pin Power Segment
Transfer Modes	PIO Mode 0-4, Multiword DMA Mode 0-2 and UDMA Mode 0-5, SATA I, SATA II support
Data transfer rate	SLC: up to 160MB/s sustained read and 140MB/s write MLC: up to 150MB/s sustained read and 90MB/s write
Software	No software drivers are required
Sectors	Standard 512 Byte sectors
Error Detection and Correction	ECC Wear Leveling Bad Block Management
Data integrity	10 years
Power requirements	5VCC +/- 5%
Power consumption	max. 2,5 W (sustained write)
Capacity	8, 16, 32, 64, 128, 256GB (other capacities on request)
Data access time	on average 0,4ms
Temperature range (operating)	0°C up to 70°C (standard termperature range) -40°C up to 85°C (industrial termperature range) (max. 64GB)
MTBF	>4 000 000 hours (Telcordia 25°C)
Data Write/Erase Endurance	2 000 000
Warranty	5 years

Order information

Description	Part numberr
2,5" SATA Drive Capacity (xxx): 8, 16, 32, 64GB 0°C up to 70°C (Standard temperature range)	D2ST-xxGJ12C1
2,5" SATA Drive Capacity: 128GB 0°C up to 70°C (Standard temperature range)	D2ST-A28J12C1
2,5" SATA Drive Capacity (xxx): 8, 16, 32, 64GB -40°C up to 85°C (Extended temperature range)	D2ST-xxGJ12W1
2,5" SATA Drive mit MLC Flash Memory Capacity: up to 256GB 0°C up to 70°C (Standard temperature range)	D2ST-xxGJ12C1M