The InnoDisk SATA 10000 Flash Drive with form factor 1.8" is similar to the 2.5" modell a Solid State drive with an excellent performance. It achieves data transfer rates up to 70 MB/s (sustained write) and 120 MB/s (sustained read). With its robust metal casing it offers like all other InnoDisk Solid State drives high reliability, low power consumption and a noiceless operating. As a HD alternative it is primarily capable in environments with restricted space. The InnoDisk SATA 10000 is available with capacities from 8 up to 32 GB.
The InnoDisk SATA 10000 is also available with a 2.5" form factor.
The InnoDisk SATA 10000 is also available with a 2.5" form factor.
InnoDisk SATA 10000 1,8" Storage Drive
- 8, 16, 32, 64GB SLC NAND Flash memory
- No moving parts
- Standard Micro SATA II Interface
- Standard hard disk format
- PIO- Multiword DMA- and UDMA Support
- ECC Defect Management
- Wear Leveling
- Shock- and vibrations resistant
- Low power consumption
- No additional software drivers are required
- Extended temperature range optional
| Form Factor/Dimensions | 1,8" |
| Width: | 54,0 mm |
| Depth: | 78,5 mm |
| Height: | 5 mm |
| Solid State | SLC respectively MLC NAND Flash (industrial standard) no moving parts |
| Interface | SATA II 3.OG |
| Mounting | Hard disk industrial standard, all orientations |
| Connector | Standard 7-pin Signal Segment and 9-pin Power Segment |
| Transfer Modes | PIO Mode 0-4, Multiword DMA Mode 0-2 and UDMA Mode 0-5, SATA I, SATA II support |
| Data transfer rate | SLC: up to 160MB/s sustained read and 140MB/s write MLC: up to 150MB/s sustained read and 90MB/s write |
| Software | No software drivers are required |
| Sectors | Standard 512 Byte sectors |
| Error Detection and Correction | ECC Wear Leveling Bad Block Management |
| Data integrity | 10 years |
| Power requirements | 5VCC +/- 5% |
| Power consumption | max. 2,5 W (sustained write) |
| Capacity | 8, 16, 32GB SLC Flash 8, 16, 32,64GB MLC Flash |
| Data access time | on average 0,4ms |
| Temperature range (operating) | 0°C up to 70°C Standard temperature range -40°C up to 85°C Extended temperature range (only SLC) |
| MTBF | >3 000 000 hours (Telcordia 25°C) |
| Data Write/Erase Endurance | 2 000 000 |
| Warranty | 5 years |
| Description | Part numberr |
|---|---|
| 1,8" SATA Drive Capacity (xxx): 8, 16, 32GB 0°C up to 70°C (Standard temperature range ) |
D1ST-xxGJ12C1 |
| 1,8" SATA Drive Capacity 8, 16, 32GB -40°C up to 85°C (Extendedr temperature range ) |
D1ST-xxGJ12W1 |
| 1,8" SATA Drive with MLC Flash Technology Capacity (xxx): 8, 16, 32,64GB 0°C up to 70°C (Standard temperature range ) |
D1ST-xxGJ12C1M |
Please ask for additional products
(Technical details are subject to change without prior notice)