APdate! card solutions

The InnoDisk SATA 20000 series includes Flash drives which suits industrial needs. They afford large capacities and fast data transfer. The characteristic of the series is the concept to support multiple types in each case with separate firmware supporting the most varied application requirements uncompromisingly.
SATA 20000-R (with capacities starting at 16GB up to 256GB) and SATA 20000-H are available in version 1 with the focus on streaming performance and in version 2 with the focus on optimized I/O performance.
SATA 20000-X is exclusivlely optimized on I/O performance and achieves more than 10000 IOPS at 4KB blocks.

InnoDisk SATA 20000-R

• 16, 32, 64 and 128GB SLC NAND Flash memory respectively 128 and 256GB MLC NAND Flash memory
• No moving parts
• Standard SATA II Interface
• Standard hard disk format
• PIO- Multiword DMA- and UDMA Support
• ECC Defect Management
• Static Wear Leveling
• SMART Functions
• Security Functions optional
• Shock and vibrations resistant
• Low power consumption
• No additional driver software required
• Extended temperature range optional
• Customization possible

Specification

Form Factor/Dimensions	2,5"
Width:	69,7 mm
Depth:	99,88 mm
Height	9,3mm
Solid State	SLC NAND Flash (128GB) MLC NAND Flash (128 and 256GB) no moving parts
Interface	SATA II 3.OG
Mounting	Hard disk industrial standard, all orientation
Connector	Standard 7-pin Signal Segment and 15-pin Power Segment
Transfer Modes	PIO Mode 0-4, UDMA Mode 0-5, SATA I and SATA II support
Data transfer rate	Version 1 SLC Version 2 Sequential Read: max. 235MB/s max. 165MB/s Sequential Write: max. 160MB/s max. 90MB/s Random Read: max. 5130 IOPS@4KB max. 1710 IOPS@4KB Random Write: max. 12 IOPS@4KB max. 120 IOPS@4KB Version 1 MLC Sequential Read max. 230MB/s Sequential Write max. 160MB/s
Software	No software drivers are required
Sectors	Standard 512 Byte sectors
Error Detection and Correction	ECC, Static Wear Leveling, Bad Block Management ATA compatible Self Monitoring, Analysis and Reporting Technology (S.M.A.R.T)
Security Functions (optional)	Version 1: not available Version 2: Quick Erase (H/W secure erase), Secure Erase (S/W secure erase), Write Protect
Data integrity	10 years (SLC)
Power requirements	5VCC +/- 5%
Power consumption (SLC)	max.3,9 W (Sequential Read)
Capacity	16, 32, 64, 128GB SLC orr MLC, 256GB MLC (other capacities on request)
Temperature range (operating)	0°C up to 70°C Standard temperature range -40°C up to 85°C Extended temperature range, SLC
MTBF	SLC: 6,938,434 hours (Telcordia, 25°C) MLC: 6,716,179 hours (Telcordia, 25°C)
Data Write/Erase Endurance	2 000 000 (SLC)
Warranty	5 years

Order information

Description	Part number
2,5" SATA Drive, SLC Flash Version (v): 1, 2 Capacity (xxx): 16, 32, 64,GB 0°C up to 70°C (Standard temperature range)	D2SR-xxGJv2C1
2,5" SATA Drive, MLC Flash Version 1 Capacity (xxx): 16, 32, 64,GB 0°C up to 70°C (Standard temperature range)	D2SR-xxGJ12C1M
2,5" SATA Drive, SLC Flash Version (v): 1, 2 Capacity 128GB 0°C up to 70°C (Standard temperature range)	D2SR-A28Jv2C1
2,5" SATA Drive, MLC Flash Version 1 Capacity 128GB 0°C up to 70°C (Standard temperature range)	D2SR-A28J12C1M
2,5" SATA Drive, MLC Flash Version 1 Capacity 256GB 0°C up to 70°C (Standard temperature range)	D2SR-B56J12C1M
2,5" SATA Drive SLC Flash Version (v): 1, 2 Capacity (xxx): 16, 32, 64,GB -40°C up to 85°C (Industrie Temperaturbereich)	D2SR-xxGJv2W1
2,5" SATA Drive, SLC Flash Version (v): 1, 2 Capacity 128GB -40°C up to 85°C (Industrial temperature range)	D2SR-A28Jv2W1